KEEP ECO-GRIP
PERFORMING.
Proper cleaning helps remove grease, soil and contaminants from your Eco-Grip floor while maintaining the performance your facility depends on every day.
USE HOT WATER
Pre-rinse and final rinse with hot water.
8 MINUTES
Allow cleaner to dwell before the final scrub.
SCRUB THOROUGHLY
Pay additional attention to high-grease areas.
RINSE COMPLETELY
Remove cleaning agent and contaminants from the floor.
Clean thoroughly.
Rinse completely.
Commercial kitchens and other high-use environments put floors in constant contact with grease, food debris, soil and cleaning chemicals. A consistent cleaning routine helps keep those contaminants from accumulating on the floor surface.
Eco-Grip's recommended procedure combines hot water, commercial floor cleaner, mechanical scrubbing and a thorough final rinse to remove soils from the flooring system.
Do not leave used cleaning solution and contaminants behind. Thorough rinsing is essential to the cleaning process.
Nine steps to a
properly cleaned floor.
Follow this process as part of your regular Eco-Grip cleaning and maintenance routine.
Place Wet Floor Signs
Place caution signs in highly visible areas before beginning the cleaning process.
Remove Loose Debris
Thoroughly sweep the floor and remove food, dirt and other loose debris.
Rinse With Hot Water
Pre-rinse the floor using hot water and a hand-held sprayer.
Apply Eco-Grip Cleaner
Connect the foam gun to Eco-Grip floor cleaner and liberally foam the floor surface using hot water.
Scrub the Floor
Use a deck brush to quickly but thoroughly scrub the entire floor area.
Wait 8 Minutes
Allow the cleaner to dwell on the flooring for eight minutes.
Re-Scrub Grease Areas
Scrub again as needed in areas with heavier grease accumulation.
Rinse Thoroughly
Rinse the entire floor thoroughly with fresh hot water to remove cleaner and contaminants.
Squeegee to Drains
Direct remaining water to the drains with a squeegee and allow the floor to dry.
See the process
in action.
Watch the Eco-Grip cleaning procedure from start to finish, including cleaner application, scrubbing, rinsing and water removal.
Everything you need.
One cleaning system.
Eco-Grip cleaning products and tools are available through our online store, including the commercial floor cleaner and complete cleaning kit.
SHOP CLEANING PRODUCTS →Commercial Floor Cleaner
Eco-Grip commercial cleaning solution for routine floor maintenance.
Foam Gun
Applies cleaner across the floor surface as part of the recommended process.
Hot Water Hose
Supports the hot-water pre-rinse, application and final rinse process.
Deck Brush
Provides mechanical scrubbing across the floor and high-grease areas.
Squeegee
Directs rinse water and remaining contaminants toward floor drains.
All-in-One Cleaning Kit
A convenient way to purchase the core Eco-Grip cleaning equipment together.
Year Extended Warranty
Regular and consistent use of the Eco-Grip Flooring Complete Cleaning System is required for extension of the standard five-year warranty to the full ten-year warranty.
Maintenance is part of
long-term performance.
A consistent maintenance program does more than improve appearance. Proper cleaning helps remove grease, soil and cleaning residue that can accumulate in busy commercial environments.
Following the Eco-Grip cleaning procedure and using the complete cleaning system can also support extended warranty coverage.
Keep your floor
ready for the next shift.
Follow the recommended Eco-Grip cleaning process, keep the proper tools on hand and make thorough cleaning part of your facility's daily routine.